|
|
The CUV- direct attachment cuvette holders are available for all our fiber optic light sources, forthe different models see technical data table. The direct attach cuvette holders can be used for absorbance and fluorescence measurements.
Product Details...
The CUV-UV/VIS, CUV-FL-UV/VIS and CUV-ALL-UV/VIS cuvette sample holders are designed for transmission/fluorescence measurements using a 10 x 10 mm cuvette.
Product Details...
This completely new designed cuvette holder with attenuator for Avantes Xenon and LED light sources has substantial benefits for the user. Attaching the CUV-DHC-XE-LED-DA directly to the light source removes the need for an extra fiber with its subsequent
Product Details...
The AS-161-DLL and AS-5216-DLL are the Windows Interface DLL-Packages for Windows 95/98/2000 and Windows NT/ME/XP/Vista that allows you to easily write custom software solutions for the AvaSpecs.
Product Details...
The ME-FI-SM-MM SMA fiber interconnect and ME-SM-BC SMA Bulkhead are accessories for SMA-terminated optical fibers.
Product Details...
Fiber optic cables can be made in different lengths up to several hundreds meters.
The standard length is 2 meters, contact us for specific requirements.
Product Details...
The Fiber Optic Multiplexer is an instrument that can optically couple 1 input channels to 16 different output channels. The multiplexer consist of a precisely controlled stepper motor and a rotator block. The optical path is coupled through multiple COL-
Product Details...
The In-line Fiber Optics Switch (FOS) was developed for applications and setups where an automatic save-dark (1 light path) or correct for drift (2 light paths) needs to be performed.
Product Details...
Fluorescence measurements are required in many biology (chlorophyll and carotenoid), biomedical (fluorescence diagnosis of malignancies) and environmental applications.
Product Details...
The variable in-line attenuator was developed for applications and setups where too much light is a problem.
Product Details...
The Micro Transmission Dip Probe is a miniature transmission probe for micro-liter sampling.
The miniaturized tip of only 1,6 mm diameter enables sampling in all micro centrifuge tubes available on the market.
Product Details...
The Mini Transmission Dip Probe is a miniature transmission probe for absorption measurements. The miniaturized tip of only 3,2 mm (1/8") diameter enables sampling in most miniaturized centrifuge tubes available on the market.
Product Details...
The AS-161 is a modularly designed electronics board with a 16-bit microprocessor, 2 channel 14-bit AD converter and USB/RS232-interface.
Product Details...
The AS-5216 is a revolutionary new design electronics board to support a wide range of new detectors and both high speed (USB2.0) and wireless (Bluetooth) communication.
Product Details...
The PS-12V/24 VDC Power adapters converts the 100-240 VAC into a 12V or 24V DC Voltage.
Product Details...
The FCR-7xx200-2 is a standard reflection probe to get spectral information of diffuse or directly reflecting or back-scattering materials.
Product Details...
The FCR-7xx200-2-45 is a reflection probe to get spectral information about powders or highly absorbing fluids. The probe end is simply dipped into the powder or liquid to do the measurements.
Product Details...
The FCR-14xx200-2-REF is a special reflection probe to get spectral information of diffuse or direct reflecting materials.
The reference leg was added to be able to correct fluctuations of the lightsource by a second spectrometer channel.
Product Details...
The FCR-7xx200-2-1,5/2,5x100 is a reflection probe with a small tip to get spectral information of diffuse or direct reflecting materials. This probe is implemented in many medical applications.
Product Details...
The transmission dip probe is used to obtain online and in-line absorbance measurements in fluids. By dipping or permanently mounting the probe end into the fluid stream, the absorbance is measured.
Product Details...
The transmission dip probe with variable path length can be used to obtain online and inline absorbance measurements in fluids. The 1/2” Probe has an optical path length, which can be set by the user in a range from 0.5 mm to 20 mm.
Product Details...
The FC-VFT vacuum feedthroughs are designed for use of fiber optics in vacuum chambers, such as for plasma monitoring.
Product Details...
The variable Collimating Lens Holder is an assembly for mounting lenses at multiple positions, and is useful for transmission measurements of large or thick samples not easily accommodated by other sampling optics.
Product Details...
For applications where just an in-line filter is needed, the in-line filter holder is available.
Product Details...
The CUV-VAR-UV/VIS cuvette holder with variable path length is designed for low absorption measurements and for flow cells. The variable path length enables optimal flexibility.
Product Details...
|
