1/2" Industrial Fluorescence Probe

For fluorescence applications a special reflection probe was developed with 12 excitation fibers of 200µm around a 600µm read fiber, which takes the fluorescence signal back to the spectrometer.
A special reflector accessory FCR-FLTIP-IND is attached to the probe end to turn the 45º reflection probe into a fluorescence probe. The accessory prevents ambient light entering the probe and backscatters the excitation light to increase the fluorescence signal. The fluid channel path can be varied between 0 and 5 mm.

  

Fibers Illumination	12  fibers of 200µm, UV/VIS
Fibers Detection	1 fiber 600µm
Wavelength Range	200-800 nm (UV/VIS) or 350-2000 nm (VIS/NIR)
Connector	2 x SMA 905
Probe End	Stainless steel 316 cylinder, 128 mm long x 12,7 mm (1/2") diameter. The probe end contains a ca. 10 mm diam. x 1 mm thick sapphire window with anti-reflection coating. The probe tip is exchangeable and waterproof.  Optionally –PK for PEEK or –HY for Hastelloy® C276
Fluorescence Accessory	See drawing below
Tubing	The optical fibers are protected by a silicon inner tube and a flexible chrome plated brass outer tubing. The tubing also gives stress relieve. OD: 5,0 mm Optionally a waterproof, steel reinforced, silicon tubing can be provided
Temperature	-30 C to 100 C. (-HT version 200 ºC )
Pressure	Probe head 10 bar @ 25 ºC
Bending	Minimum bend radius:   Short term (few seconds) 60 mm, long term:   360 mm