The Micro Transmission Dip Probe is a miniature transmission probe for micro-liter sampling.
The miniaturized tip of only 1,6 mm diameter enables sampling in all micro centrifuge tubes available on the market.
The micro Dip Probe has a 10 mm optical path length and can be used in a wavelength range from 200-800nm (UV) or 350-2000nm (IR).
The distance for the optical path from the probe end is 7 mm, the probe has 2 SMA connectors to conveniently couple to the Avantes line of spectrometers and light sources. The probe has 3 UV/VIS fibers of 400 µm, 2 for illumination and 1 for detection.
Technical Data
Fibers
2 illumination, 1 detection fiber, all 400µm, UV/VIS, standard 1.5 meters
Wavelength Range
200-800 nm (UV/VIS) or 350-2000 nm (VIS/NIR)
Connectors
2 x SMA 905
Probe End
Stainless steel cylinder, 37 mm long x 1,6 mm (1/16") diameter, then 63 mm x 1,8 mm. The probe end can be delivered with 3 different path lengths: 1mm physical gap - 2mm optical path, 2.5mm physical gap - 5mm optical path and 5mm physical gap - 10mm optical path
Tubing
The optical fibers are protected by a metal reinforced PVC outer tubing. The tubing also gives stress relief. OD: 5,0 mm. Total probe length 1.5 m
Temperature
0ºC to 65ºC.
Bending
Minimum bend radius: Short term (few seconds) 40 mm, long term: 240 mm
Ordering Information
FDP-UV-micro-1
1/16" Micro Dip Probe, UV/VIS, 1 mm physical gap (2 mm optical path), 1.5m
FDP-UV-micro-2.5
1/16" Micro Dip Probe, UV/VIS, 2.5 mm physical gap (5 mm optical path), 1.5m
FDP-UV-micro-5
1/16" Micro Dip Probe, UV/VIS, 5 mm physical gap (10 mm optical path), 1.5m
FDP-IR-MICRO-5
1/16" Micro Dip Probe, VIS/NIR, 5 mm physical gap (10 mm optical path), 1.5m
