User Login






Lost Password?
No account yet? Register
Please note:
For ALL software downloads you need to register.

Application Icons

Home arrow Products arrow Fiber Optics arrow Reflection Probe (Standard)





Reflection Probe (Standard)



The FCR-7xx200-2 is a standard reflection probe to get spectral information of diffuse or directly reflecting or back-scattering materials.

Via a standard SMA905 connector light from a light source is coupled into a fiber bundle, consisting of 6 fibers and carried to the probe end. The surface will selectively reflect light back into a 7th fiber. This fiber transfers the data to the output SMA905 connector, which can be coupled to a spectrometer. A higher number of fibers are possible to couple more energy from the light source and to increase the signal level. For measurements under 90º the FCR-90-Option, a special adapter with a mirror under 45º, was developed, which can be easily mounted on the tip of the reflection probe. The FCR-COL is available to focus the measurement spot on an extended distance.

 


Technical Data
Fibers 7 fibers 200 µm or 400 µm core, 6 light-fibers, 1 read fiber, N.A.= 0,22. Standard 2m length,  splitting point in the middle.
Wavelength range 200-800 nm (UV/VIS) or 350-2000 (VIS/NIR)
Connectors SMA905 connectors (2x)
Probe end Stainless steel 316 cylinder, 50 mm long x 6,35 mm diameter. Optionally -PK for PEEK or -HY for Hastelloy® C276
Tubing The optical fibers are protected by a silicon inner tube and a flexible chrome plated brass outer tubing. The tubing also gives stress relieve. OD: 5.0 mm
Temperature -30ºC to 100ºC. (-HT version 200°C. -HTX version 500°C)
Pressure Probe head 50 bar @ 25°C 
Bending Minimum bend radius:   Short term (few seconds) 20-40 mm, long term: 120-240 mm

3fcr7uvvis-xxx-2real.jpg











Ordering Information

FCR-7xx200-2-ME

Reflection probe, 7 x 200µm fibers, 2 m length, SMA term.

FCR-7xx400-2-ME

Reflection probe, 7 x 400µm fibers, 2 m length, SMA term.

FCR-90-Option 90º Reflection add-on reflector for use with all ¼" reflection probes
FCR-COL Adjustable UV/VIS/NIR Collimating/focusing lens for FCR probes
Options  
-HT High temperature version (up to 200°C) 
-HTX Extreme High Temperature (up to 500°C)
-PK PEEK Probe material replaces Stainless Steel
-HY Hastelloy® C276 Probe material replaces Stainless Steel