The variable in-line attenuator was developed for applications and setups where too much light is a problem.
Product Details...
Integrating Sphere with internal halogen light source. The AvaSpere-50-LS-HAL is the ideal combination of an integrating sphere with an internal halogen light source. The integrating sphere can be used for reflection measurements with diffuse halogen ligh
Product Details...
Integrating spheres generally function as a light collector. The collected light can be used as a diffuse illumination source or as a measurement source.
Product Details...
For applications where larger size diameters of integrating spheres are required Avantes now offers a range of Barium Sulfate coated spheres with internal diameters of 100, 150, 200 and 300mm.
Product Details...
The Micro Transmission Dip Probe is a miniature transmission probe for micro-liter sampling.
The miniaturized tip of only 1,6 mm diameter enables sampling in all micro centrifuge tubes available on the market.
Product Details...
The Mini Transmission Dip Probe is a miniature transmission probe for absorption measurements. The miniaturized tip of only 3,2 mm (1/8") diameter enables sampling in most miniaturized centrifuge tubes available on the market.
Product Details...
The AS-161 is a modularly designed electronics board with a 16-bit microprocessor, 2 channel 14-bit AD converter and USB/RS232-interface.
Product Details...
The PS-12V/24 VDC Power adapters converts the 100-240 VAC into a 12V or 24V DC Voltage.
Product Details...
The WS-2 white reference tile is made out of a white diffuse PTFE based material, meeting the highest demands with regard to high grade diffuse reflectance. The WS-2 is mostly used in colorimetric applications where a reference signal has to be obtained d
Product Details...
The FCR-7xx200-2 is a standard reflection probe to get spectral information of diffuse or directly reflecting or back-scattering materials.
Product Details...
The FCR-7xx200-2-45 is a reflection probe to get spectral information about powders or highly absorbing fluids. The probe end is simply dipped into the powder or liquid to do the measurements.
Product Details...
The FCR-14xx200-2-REF is a special reflection probe to get spectral information of diffuse or direct reflecting materials.
The reference leg was added to be able to correct fluctuations of the lightsource by a second spectrometer channel.
Product Details...
The FCR-7xx200-2-1,5/2,5x100 is a reflection probe with a small tip to get spectral information of diffuse or direct reflecting materials. This probe is implemented in many medical applications.
Product Details...
The transmission dip probe is used to obtain online and in-line absorbance measurements in fluids. By dipping or permanently mounting the probe end into the fluid stream, the absorbance is measured.
Product Details...
The transmission dip probe with variable path length can be used to obtain online and inline absorbance measurements in fluids. The 1/2” Probe has an optical path length, which can be set by the user in a range from 0.5 mm to 20 mm.
Product Details...
The FC-VFT vacuum feedthroughs are designed for use of fiber optics in vacuum chambers, such as for plasma monitoring.
Product Details...
The variable Collimating Lens Holder is an assembly for mounting lenses at multiple positions, and is useful for transmission measurements of large or thick samples not easily accommodated by other sampling optics.
Product Details...
For applications where just an in-line filter is needed, the in-line filter holder is available.
Product Details...
The CUV-VAR-UV/VIS cuvette holder with variable path length is designed for low absorption measurements and for flow cells. The variable path length enables optimal flexibility.
Product Details...
|
|
|
