Multipurpose Work Stand for Fiber Optic Accessories
Over the years a number of multipoint, multidirectional fiber optic holders have been developed, that are depicted on these pages. The base is a multipurpose work stand with 2 vertical support rods. The rods are secured into the base plate with M6 screws. The 300mm long, 14 mm diameter rods can be used on larger breadboards and optical tables.
MWS-CLIP4 Fiber Optic Cable Clip with 4 channels
This cable clip secures fiber optic cables up to 6 mm sleeving diameter to avoid movement of the fiber cable during the measurement.
MWS-PBHLD-6.35 Probe holder for standard reflection probes
The holder is rod mounted to the work stand, using a lockable coupling MWS-CPL-1. The probe position is lockable. The holder will accept all standard 6.35mm diameter reflection probes.
The holder is rod mounted to the work stand, using a lockable coupling MWS-CPL-1. The probe position is lockable. The holder will accept a 1.5mm diameter reflection probes (FCR-7xx200-2-1.5x100) and 1.5mm ferrule terminated fiber optics (FC-xx200-2-1.5x40).
MWS-PBHLD-MULT Multiple Probe holder
The holder is rod mounted to the work stand, using a lockable coupling MWS-CPL-1. Holds 2 different sizes probes (xx and yy, please specify) in 2 positions. Provided with a clamp fitting to hold and position ferrules and probes up to 10 mm diameter.
The holder is rod mounted to the work stand, using a lockable coupling MWS-CPL-1. The holder will accept 1.5mm diameter reflection probes (FCR-7xx200-2-1.5x100) and 1.5mm ferrule terminated fiber optics (FC-xx200-2-1.5x40). The default angle is 30 degrees, for other angles please contact us. The holder can be ordered with 2-7 holes to accept up to 7 probes. Please specify holes location and configuration.
MWS-AWD-15/30 SMA Fiber holder adjustable working distance 15/30mm
The holder is rod mounted to the work stand, using a lockable coupling MWS-CPL-1. The holder will accept any SMA, ST and FC/PC terminated fiber optic up to 1000µm core diameter. 2 versions are available, one with a scaled 15 mm working distance and the other with a 30 mm scaled working distance. Both types have a 25mm diameter working aperture on the underside.
MWS-SAPLCL-10 Rod mounted sample platforms with 10 mm diameter aperture and Clip
The sample platform is rod mounted to the work stand, using a lockable coupling MWS-CPL-1. The sample platform can hold samples, to be measured for transmission, scattering, reflection or fluorescence on a vertical axis.
Ordering Information
MWS-1
Multipurpose work stand with 1 rod 300mm long, 14mm diameter
MWS-2
Multipurpose work stand with 2 rods 300mm long, 14mm diameter
Products