For fluorescence applications a special reflection probe was developed with 12 excitation fibers of 200µm around a 600µm read fiber, that takes the fluorescence signal back to the spectrometer.
Product Details...
The FCR-7xx200-2-45-IND is a heavy-duty reflection probe with exchangeable tip to get spectral information about powders or thick fluids. The probe end is simply dipped into the powder or liquid to do the measurements.
Product Details...
The collimating lenses convert divergent beams of light into a parallel beam.
Product Details...
The cosine correctors are spectro radiometric sampling optics, designed to collect radiation (light) over 180°, thus eliminating optical interface problems associated with the light collection sampling geometry inherent to other sampling devices.
Product Details...
The ME-FI-SM-MM SMA fiber interconnect and ME-SM-BC SMA Bulkhead are accessories for SMA-terminated optical fibers.
Product Details...
Fiber optic cables can be made in different lengths up to several hundreds meters.
The standard length is 2 meters, contact us for specific requirements.
Product Details...
The compact MM-UV/VIS-SMA Modemixer is made of stainless steal and anodized aluminum and allows the connection of two optical fibers with Standard-SMA-Connectors on the two ends of the product.
Product Details...
The Micro Transmission Dip Probe is a miniature transmission probe for micro-liter sampling.
The miniaturized tip of only 1,6 mm diameter enables sampling in all micro centrifuge tubes available on the market.
Product Details...
The Mini Transmission Dip Probe is a miniature transmission probe for absorption measurements. The miniaturized tip of only 3,2 mm (1/8") diameter enables sampling in most miniaturized centrifuge tubes available on the market.
Product Details...
For many applications a fiber optic cable with multiple fibers in one connector is required. These so-called multi-furcated fiber cables can be offered in many different configurations, most of them are standard 2m length, on one side an SMA connector wit
Product Details...
Over the years a number of multipoint, multidirectional fiber optic holders have been developed, that are depicted on these pages. The base is a multipurpose work stand with 2 vertical support rods.
Product Details...
The FCR-7xx200-2 is a standard reflection probe to get spectral information of diffuse or directly reflecting or back-scattering materials.
Product Details...
The FCR-7xx200-2-45 is a reflection probe to get spectral information about powders or highly absorbing fluids. The probe end is simply dipped into the powder or liquid to do the measurements.
Product Details...
The FCR-14xx200-2-REF is a special reflection probe to get spectral information of diffuse or direct reflecting materials.
The reference leg was added to be able to correct fluctuations of the lightsource by a second spectrometer channel.
Product Details...
The FCR-7xx200-2-1,5/2,5x100 is a reflection probe with a small tip to get spectral information of diffuse or direct reflecting materials. This probe is implemented in many medical applications.
Product Details...
For special applications where a fiber probe needs to be installed in a harsh industrial environment, specific features may be required. Avantes has been constructing many high quality probes for harsh environments over more than 15 years.
Product Details...
The transmission dip probe is used to obtain online and in-line absorbance measurements in fluids. By dipping or permanently mounting the probe end into the fluid stream, the absorbance is measured.
Product Details...
The transmission dip probe with variable path length can be used to obtain online and inline absorbance measurements in fluids. The 1/2” Probe has an optical path length, which can be set by the user in a range from 0.5 mm to 20 mm.
Product Details...
The FC-VFT vacuum feedthroughs are designed for use of fiber optics in vacuum chambers, such as for plasma monitoring.
Product Details...
Results 1 - 20 of 20
|
|
|
