For fluorescence applications a special reflection probe was developed with 12 excitation fibers of 200µm around a 600µm read fiber, that takes the fluorescence signal back to the spectrometer.   Product Details...

The FCR-7xx200-2-45-IND is a heavy-duty reflection probe with exchangeable tip to get spectral information about powders or thick fluids. The probe end is simply dipped into the powder or liquid to do the measurements.  Product Details...

The 12V battery pack is specially constructed for use with the AvaSpec-USB2-BT platform spectrometers with Bluetooth interface.  Product Details...

The AvaLight-DH-S is a combined Deuterium and halogen light source, which can be used for UV/VIS/NIR applications.  Product Details...

The AvaLight-DH-S-BAL is an improved version of the AvaLight-DH-S combined Deuterium and halogen light source, which can be used for UV/VIS/NIR applications.  Product Details...

The AvaLight-DHc is a combined deuterium-halogen light source, to be used for UV/VIS/NIR- applications.  Product Details...

The AvaLight-HAL is a compact stabilized halogen fan-cooled light source that can be used for the visible range and the near infrared.  Product Details...

The AvaLight-LED light sources are compact, low-cost Light Emitting Diodes that produce continuous or pulsed spectral output at different wavelengths for high sensitivity fluorescence measurements.  Product Details...

The AvaLight-XE is a xenon pulsed light source, used for UV-applications, such as fluorescence measurements.  Product Details...

The AvaSoft-FULL version needs to be ordered separately and has a lot of additional features over the basic version.  Product Details...

AvaSoft-XLS is an add-on application that enables Avasoft Full to output history channel data and/or complete spectra to Microsoft Excel.  Product Details...

AvaSoft-CHEM has been developed to enable on-line concentration determination with a spectrometer system. According to Lambert-Beer's law, there is a linear relationship between absorbance and concentration.  Product Details...

The Process Control Application software allows the user to define minimum and maximum threshold values for the 8 time series functions.  Product Details...

AvaSoft-FOM has been written to integrate the Fiber Optic Multiplexer with a one channel AvaSpec spectrometer. A single spectrometer can be used to measure at 8 different locations sequentially.  Product Details...

All AvaSpec spectrometers with USB2 platform can be delivered with the optional Bluetooth® wireless interface.  Product Details...

The AvaSpec USB1.1 platform Fiber Optic Spectrometers can be configured as single, dual, triple, quadruple or multi-channel instrument with different spectrometer channels.  Product Details...

For both AvaSpec-USB1 and -USB2 platform spectrometers a wide range of interface cables is available to connect to our light sources and comprehensive line of accessories.  Product Details...

All AvaSpec spectrometers with USB2 platform can work in stand-alone mode. The stand-alone mode was developed for process control applications.   Product Details...

The AvaSpec-1024 Fiber Optic Spectrometer is based on the AvaBench-75 symmetrical Czerny-Turner design with 1024 pixel CMOS Detector Array.  Product Details...

The AvaSpec-128 Fiber Optic Spectrometer is the replacement of the AvaSpec-102 and based on the AvaBench-45 symmetrical Czerny-Turner design with 128 pixel Photo Diode Array.  Product Details...

The AvaSpec-2048x14 Fiber Optic Spectrometers is a back-thinned type CCD spectrometer with high quantum efficiency and high UV sensitivity. The optical design is based on the AvaBench-75 symmetrical Czerny-Turner design with a 2048x14 pixels high UV sensi  Product Details...

The AvaSpec-256 Fiber Optic Spectrometer is based on the AvaBench-45 symmetrical Czerny-Turner design with 256 pixel CMOS Detector Array.  Product Details...

The AvaSpec-3648 Fiber Optic Spectrometers is based on the AvaBench-75 symmetrical Czerny-Turner design with 3648 pixel CCD Detector Array.  Product Details...

The AvaSpec-NIR256-1.7 Fiber Optic Spectrometers is based on the AvaBench-50 symmetrical Czerny-Turner design with 256 pixel InGaAs Detector Array.  Product Details...

The AvaSpec-NIR256-2.0/2.2/2.5 Fiber Optic Spectrometers are based on the AvaBench-50 symmetrical Czerny-Turner design with 256 pixel TE Cooled extended InGaAs Detector Arrays.  Product Details...

The AvaSpec-2048TEC is a special version of the AvaSpec-2048, where the Sony 2048 CCD detector is mounted on a one-stage Peltier cooling device.  Product Details...

The AvaSpec-ULS2048 consists of a revolutionary new optical bench optimized to reduce straylight and increase both mechanical and temperature stability. The new optical bench has a dual internal modestripper along with multiple CPC’s (Compound Parabolic   Product Details...

The AvaTrigger is a trigger source that can be easily attached to any of the AvaSpecs product line. The AvaTrigger has 3 different settings for external triggering, i.e. an optical trigger, a TTL trigger from an external source and a pushbutton trigger.  Product Details...

The collimating lenses convert divergent beams of light into a parallel beam.  Product Details...

The CUV- direct attachment cuvette holders are available for all our fiber optic light sources, forthe different models see technical data table. The direct attach cuvette holders can be used for absorbance and fluorescence measurements.  Product Details...