The AvaLight-LED light sources are compact, low-cost Light Emitting Diodes that produce continuous or pulsed spectral output at different wavelengths for high sensitivity fluorescence measurements.
All AvaLight-LED light sources are recommended for fluorescence applications, where the excitation wavelength can be chosen from the following table.
New is the CUV-LED, where the LED is built into an adapter that fits in a standard cuvette holder and is connected to the lamp electronics (AvaLight-LED-CON) by an electrical cable. This setup is ideal for fluorescence applications.
Other fluorescence accessories and probes, such as the CUV-DA, CUV-FL/ CUV-ALL cuvette holders and the FCR-UV200/600 fluorescence probe can be found elsewhere in this catalog. A typical application setup for fluorescence is depicted at the end of this catalog, in the applications section.
The AvaLight-LED has an SMA 905 connector for coupling to fiber optics, a PS-12V/1.0A power supply should be ordered with the unit.
The AvaLight-LED can be used as a DC source or pulsed with a programmable Pulse Width Modulation (PWM), supplied by the AvaSpec-USB2 spectrometers´output (IC-DB26-2 needed).
Spectral output different AvaLight-LED´s
Technical Data
|
AvaLight-LED255
|
AvaLight-LED340/360/380
|
AvaLight-LED400/410/430
|
AvaLight-LED450/470/490
|
AvaLight-LED530/590/780
|
|
Spectral Range*
|
255 nm
|
340/360/380 nm
|
400/410/430 nm
|
450/470/490 nm
|
530/590/780 nm
|
|
FWHM (nm)
|
20 nm
|
15 nm
|
11 nm
|
30 nm
|
30 nm
|
|
Optical power 600 µm fiber
|
5 µWatt
|
10 µWatt
|
25 µWatt
|
25 µWatt
|
25 mWatt
|
|
Connector
|
SMA 905
|
|
Power supply
|
12 VDC, 40 mA
|
|
Dimensions, weight
|
175 x 110 x 44 mm, 480 grams
|
* other wavelengths available on request
Ordering Information
|
AvaLight-LED- XXX
|
Light Emitting Diode Lightsource, specify wavelength XXX
|
|
AvaLight-LED-XXX-RM
|
Rackmount version of the Light Emitting Diode Lightsource, specify wavelength XXX
|
|
AvaLight-LED-CON
|
LED lightsource control unit with electrical connector to LED, needs extra PS-12V/1.0A and interface cable.
|
|
CUV-LED-XXX
|
LED holder for Cuvette, specify LED wavelength XXX.
|
|
CUV-DHc/XE/LED
|
Direct attach cuvette holder for AvaLight-DHc/XE/LED
|
|
IC-DB15-2
|
Interface cable AvaSpec-USB1 platfom to AvaLight-LED
|
|
IC-DB26-2
|
Interface cable AvaSpec-USB2 platfom to AvaLight-LED for PWM
|
|
PS-12V/1.0A
|
Power supply 100-240 VAC/12VDC, 1.0 A for AvaLight-LED
|
|
