The FCR-7xx200-2-45 is a reflection probe to get spectral information about powders or highly absorbing fluids. The probe end is simply dipped into the powder or liquid to do the measurements.
Via a standard SMA905 connector light is coupled into a fiber bundle, consisting of 6 fibers and carried to the probe end, where it lights up the material to be analyzed through a silica window under 45 degrees. This angle is necessary to avoid direct reflections from the window. The powder or fluid will selectively reflect light back into a 7th fiber. This fiber transfers the data to the output SMA905 connector, which can be coupled to a spectrometer or a spectrum analyzer.
Technical Data
Fibers
7 fibers 200 mm core, 6 light-fibers, 1 read fiber, N.A.= 0,22. Standard 2 meter length
Wavelength range
200-800 nm (UV/VIS) or 350-2000 (VIS/NIR)
Connectors
SMA905 connectors (2x)
Probe end
Stainless steel cylinder, 130 mm long x 6,0 mm diameter. The probe end contains a 5 mm diam. x 1 mm thick fused silica window. Waterproof
Tubing
The optical fibers are protected by a silicon inner tube and a flexible chrome plated brass outer tubing. The tubing also gives stress relief. OD: 5,0 mm
Temperature
-30ºC to 100ºC. (High Temperature Probes available on request)
Bending
Minimum bend radius: Short term (few seconds) 20 mm, long term: 60 mm
Ordering Information
FCR-7UV200-2-45-ME
Reflection probe for powders and turbid fluids, UV/VIS range
FCR-7IR200-2-45-ME
Reflection probe for powders and turbid fluids, VIS/NIR range
