Avantes Catalog X

154 | info@avantes.com | www.avantes.com Integrating Spheres An integrating sphere works as a light collector. The light collected can be used as a diffuse illumination or measurement source. The basic principle is that light enters the sphere through the sample port, goes through multiple reflections on the highly reflective, Lambertian surface of the sphere and is scattered uniformly around the interior of the sphere. Behind a baffled port inside the sphere which is independent of the angular properties of the sample port, a fiber-optic cable collects a homogenized light signal and carries it to the spectrometer. The baffle is very sig- nificant as it prevents first reflections from entering the detection fiber. The AvaSphere series integrating spheres are available with active diameters of 30, 50 and 80 mm and an SMA port at 90 degrees for collecting the irradiance and reflection signals. The reflection spheres feature an additional SMA-connector port at 8 degrees from normal (from sample port) for direct illumination. This port cou- ples external light into the sphere through a fiber-optic cable connected to a COL-UV/ VIS collimating lens. The sample port diam- eters are 6 mm for the AvaSphere-30, 10 mm for the AvaSphere-50 and 15 mm for the AvaSphere-80. All sample ports are knife-edge, ensuring a near 180 degree field of view of the sample port. The irradiance version of the integrat- ing sphere can be used for measurements of light sources, such as lasers, LEDs and incandenscent sources. For irradiance mea- surements of 5 mm cylindrical LEDs, a spe- cial adapter is available for the AvaSphere- 50/80-IRRAD. This adapter ensures correct and reproducible positioning of the LEDs inside the sphere. The AvaSphere reflection version is used for the measurement of total integrated reflectance of a surface, as well as for color measurements and fluorescence spectros- copy on solids/powders. The principle of measurement is based on direct illumina- tion and indirect reflection. The AvaSphere-50-LS-HAL with internal light source can be a used as a uniform source and is available with an intensity calibration file. The inside of the integrating spheres is made of a highly reflective diffuse PTFE material. This provides over 96% reflec- tance over a wide wavelength range of 250-2500 nm. For the AvaSphere-50-REFL a special black gloss-trap is available to exclude specular reflection in the measure- ment. Please order this option when order- ing the sphere. In case specular reflection needs to be included, a white reflective part, which is standard on all AvaSphere- 50-REFL, can be mounted in the position of the gloss-trap. Reflection Integrating Sphere Drawing for AvaSphere-50-REFL AvaSphere 30-REFL Accessories

RkJQdWJsaXNoZXIy MjY0MjM=