Multi-furcated Fiber-optic Cables

Multi-furcated Fiber-optic Cables
 
|||| ||||

Simultaneous multi-point measurements and Avantes multi-channel spectrometers, require multi-furcated fiber-optic cables. These assemblies can function as a combiner or splitter of light as they have multiple legs on side which converge into a single connector on the opposite side. Avantes offers virtually any combination possible, which can be adapted to your requirements.

Typical setups that require multi-furcated cables are:

  • One sampling point such as an integrating sphere, cosine corrector or collimating lens being measured from several spectrometers (individual AvaSpecs or Multi-channel).
  • Multiple illumination fibers splitting out from one light source to different sampling points.

Various types of connectors, jacketings and fiber sizes are available for these multi-furcated fiber cables. Contact us to configure and quote you on your specific needs.

Multifurcated fiber optic probes PDF brochure

Ordering Information

FC4-UVIR200-2  Four-furcated cable, 4x200 µm fibers, all legs SMA terminated, total 2 m long, splitting point in the middle
FC4-UVIR400-2  As FC4-UVIR200-2, but with 4x400 µm fibers
FC4-UVIR600-2  As FC4-UVIR200-2, but with 4x600 µm fibers
FC5-UVIR200-2  Five-furcated cable, 5x200 µm fibers, all legs SMA terminated, total 2 m long, splitting point in the middle
FC5-UVIR400-2  As FC5-UVIR200-2, but with 5x400 µm fibers
FC6-UVIR200-2  Six-furcated cable, 6x200 µm fibers, all legs SMA terminated, total 2 m long, splitting point in the middle
FC6-UVIR400-2  As FC6-UVIR200-2, but with 6x400 µm fibers
FC8-UVIR200-2  Eight-furcated cable, 8x200 µm fibers , all legs SMA terminated, total 2 m long, splitting point in the middle
FC8-UVIR400-2  As FC8-UVIR200-2, but with 8x400 µm fibers

Other lengths available on request.