Simultaneous multi-point measurements and Avantes multi-channel spectrometers, require multi-furcated fiber-optic cables. These assemblies can function as a combiner or splitter of light as they have multiple legs on side which converge into a single connector on the opposite side. Avantes offers virtually any combination possible, which can be adapted to your requirements.

Typical setups that require multi-furcated cables are:

  • One sampling point such as an integrating sphere, cosine corrector or collimating lens being measured from several spectrometers (individual AvaSpecs or Multi-channel).
  • Multiple illumination fibers splitting out from one light source to different sampling points.

Various types of connectors, jacketings and fiber sizes are available for these multi-furcated fiber cables. Contact us to configure and quote you on your specific needs.

Product Information

  • Ordering Information

FC4-UVIR200-2 Four-furcated cable, 4×200 µm fibers, all legs SMA terminated, total 2 m long, splitting point in the middle
FC4-UVIR400-2 As FC4-UVIR200-2, but with 4×400 µm fibers
FC4-UVIR600-2 As FC4-UVIR200-2, but with 4×600 µm fibers
FC5-UVIR200-2 Five-furcated cable, 5×200 µm fibers, all legs SMA terminated, total 2 m long, splitting point in the middle
FC5-UVIR400-2 As FC5-UVIR200-2, but with 5×400 µm fibers
FC6-UVIR200-2 Six-furcated cable, 6×200 µm fibers, all legs SMA terminated, total 2 m long, splitting point in the middle
FC6-UVIR400-2 As FC6-UVIR200-2, but with 6×400 µm fibers
FC8-UVIR200-2 Eight-furcated cable, 8×200 µm fibers , all legs SMA terminated, total 2 m long, splitting point in the middle
FC8-UVIR400-2 As FC8-UVIR200-2, but with 8×400 µm fibers

Other lengths available on request

Downloads